~- IP Changer v1.3 -~

[TaBz3]

Please, will you R-T-F-Q?
Thank you very much.

TERMS OF USAGE ~
THESE TERMS OF USE ARE A LEGAL AND BINDING AGREEMENT BETWEEN YOU AND THE CREATOR governing your use of the Content made available here. By downloading any of the Images or Content, you agree:

1). That you may only download a single copy of any Content to a single computer for personal and noncommercial use.
2). To not reproduce, distribute, modify, post on any website, or sell any of the Content.
3). To maintain any and all copyright or other proprietary notices embedded in or attached to any of the Content.
4). Use of the Content is also subject to the Terms and Conditions posted on the MPGH's website.

 ------------
 --- Main ---
 ------------

@EcHo off
title IP Changer v1.3 by TaBz3 @ MPGH.net
color A
echo :: Do you want to change your Internet Protocol?
pause
cls
echo :: Do you want to change your Internet Protocol?
echo :: Please note that this will disconnect your internet connection.
pause
cls
echo :: Do you want to change your Internet Protocol?
echo :: Please note that this will disconnect your internet connection.
CHOICE /C YNC /M "Are you sure that you want to continue? Y/N (Cancel)"
IF ERRORLEVEL 3 GOTO three
IF ERRORLEVEL 2 GOTO two
IF ERRORLEVEL 1 GOTO one
:one
ECHO Yes, I want to change my IP, please!
GOTO end
:two
ECHO No, thank you.
pause
GOTO exit
:three
ECHO // Program Terminated- //
pause
GOTO exit
:end
ipconfig /release
ipconfig /renew
echo. 
ECHO Resetting IP Address and Subnet Mask For DHCP
netsh int ip set address name = "Local Area Connection" source = dhcp
echo.
ECHO Resetting DNS For DHCP
netsh int ip set dns name = "Local Area Connection" source = dhcp
echo.
ECHO Resetting Windows Internet Name Service (WINS) For DHCP
netsh int ip set wins name = "Local Area Connection" source = dhcp
echo.
ECHO Here are the new settings for %computername%:
netsh int ip show config
echo THESE ARE YOUR NEW INTERNET PROTOCOL SETTINGS
echo [IPV4, IPV6 CHANGED AND MASKED - SB MASK AND CONNECTION SSID RESET]
ping localhost
echo.
echo -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
echo ~ // PRESS F5 BEFORE YOU CLOSE THIS COMMAND LINE! //
echo -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
echo x=msgbox ("Thanks for using my tool, a nice comment will do... and maybe a rep+ ;)",0,"Thanks for using TaBz3's IPC v1.3") >ClickHere.vbs
COLOR 1f
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 2F
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 3F
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 0f
color A
pause
:exit
echo Thanks anyway...
~~~
 -------------
 --- Quick ---
 -------------

@EcHo off
title IP Changer v1.2 by TaBz3 @ MPGH.net
color A
ipconfig /release
ipconfig /renew
ECHO Resetting IP Address and Subnet Mask For DHCP
netsh int ip set address name = "Local Area Connection" source = dhcp
echo.
ECHO Resetting DNS For DHCP
netsh int ip set dns name = "Local Area Connection" source = dhcp
echo.
ECHO Resetting Windows Internet Name Service (WINS) For DHCP
netsh int ip set wins name = "Local Area Connection" source = dhcp
echo.
ECHO Here are the new settings for %computername%:
netsh int ip show config
echo THESE ARE YOUR NEW INTERNET PROTOCOL SETTINGS
echo [IPV4, IPV6 CHANGED AND MASKED - SB MASK AND CONNECTION SSID RESET]
echo x=msgbox ("Thanks for using my tool, a nice comment will do... and maybe a rep+ ;)",0,"Thanks for using TaBz3's IPC v1.3") >ClickHere.vbs
COLOR 1f
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 2F
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 3F
PING 1.1.1.1 -n 1 -w 10 >NUL
COLOR 0f
color A
~-~-~
Hope you enjoy!
These codes are free from viruses.
Please download from the creator. (TaBz3)

IP Changer.rar MD5:996ea78e3550d24868f7a3ef2f8705ac - VirSCAN.org Scanners did not find malware!
IP Changer.rar - Jotti's malware scan

After usage, please click the 'Thanks' next to this thread!
Thank you for your co-operation and I hoped you enjoy this tool.

[Jacket]

All good. /approved
Nice work.

[TaBz3]

All good. /approved
Nice work.

Thanks, I've updated it so there is less clutter etc.
There is also a Quick mode!
...and could you Update the CrossFire Resources Thread?
(remove the v1, and update the 1.2 to 1.3.)

[BGS. flameboy]

good job

[TaBz3]

good job

Thank you very much, I hope you have enjoyed this tool.
Constructive critism is welcome and I'll try adding improvements on the further updates.

[BGS. flameboy]

Thank you very much, I hope you have enjoyed this tool.
Constructive critism is welcome and I'll try adding improvements on the further updates.

mmh yes hold it up

[RAWR(:]

Meh
+1 for effort

However, you should note that this doesn't work for the following people:
Static IPs issued by the ISP
People who are using a router

[TaBz3]

Meh
+1 for effort

However, you should note that this doesn't work for the following people:
Static IPs issued by the ISP
People who are using a router

Hmm... read the readme file or my other thread please!
I already know this

[RAWR(:]

Hmm... read the readme file or my other thread please!
I already know this

I already know this. And I shouldn't have to read another topic that I know nothing about if I was new on the forum.

And I don't see the point in downloading a program just to find that it won't work at all. (;

I'm not criticizing, I'm just saying it would be useful information to actually have in the topic post itself rather then in a readme file.

[TaBz3]

I already know this. And I shouldn't have to read another topic that I know nothing about if I was new on the forum.

And I don't see the point in downloading a program just to find that it won't work at all. (;

I'm not criticizing, I'm just saying it would be useful information to actually have in the topic post itself rather then in a readme file.

You do know there is a point of a "readme" file.
...but if you do not wish to download & use this file, then fine.
It's your free will. (Oh, and F.Y.I. This does work)

[forever109]

nice indeep~~

[str0fgod]

i've done everything, still same IP

[[R]3X]

Great job man keep it up!

[Rullez]

Great......Ths

[BluntGod_]

Nicee man. +Rep.