Nippy's Fishing Bot v1.4.2

[reppin]

Please note as of 1.4.1 the decon part of the bot has been removed by default. To many wanted just the boot drop. Anyhow if you want the decon part back in. All you need to do is rename the BootDrop.exe to BootDrop2.exe then rename the BootDropD.exe to BootDrop.exe.

Also since the 2x fishing is still on. You need to change the scan start time from 12secs to around 4 to 6seconds.

Also due to the mods butchering my posts for each release I will make a new thread if I can't edit my own.

Welcome to Nippy's Fish Bot thread. Here you will see my rant about whats bad about the old way everyone else's bot out there does things. Sorry but I just have to put it out there. First if you multi client like I do you hate having to open more then one exe to run the fisher on each client. The old way used loops and was vary poorly made. I tired and tired but failed to convert the old way in to a multi client due to the looping. Second, Not a fan of the ticktimer. It was not a vary good way to tell if it was not fishing or full inventory. It never could truly tell if you had a lure in the water or not. Third, The way it was scanning memory is it would scan all 3 liquid types. This can cause issues with CPU usage if you ran more then one client. Fourth, It would waste lures for no bloody reason other then to waste them. But for now I should stop this rant here since you are probably not even reading this and just want the bot anyhow. There are a whole list of things that wrong in old way. That I have corrected in mine. Feel free to take a look at the code and compare to others you will notice no other is like mine.

Oh, And before you say its just another bot. Sure it is but it is not a clone of other bots like all the ones out there are. It is way better in so many ways. Just take a peak at the source and see for your self. It is nothing like the others.


Ok, On ward with the bot it self.

I need to give a shout out to @taejim he helped me with a few things that helped improve the reliability of the bot with ideas and some coding ideas and just someone to bounce issues off to till a idea stuck and worked.
Greetings all those older bot writers that are basically the same old bot with a new skin. You know who you are and I have come to crush you.

Now to the good parts that you really came here for.

GUI Preview:




How to use
The hotkeys are as followed.

NumberPad1 Start and Stop Single client.
This key will start the Auto Fish for the client in the foreground. The client must be in the foreground for this to work. If the client is already fishing it will reset the counters for that client.

NumerPad3 Stop Single client
This will stop the foremost active window client.

CTRL+NumberPad1 This will start all trove.exe clients at once.
With this hotkey will start every client open at once. Make sure you pointing at what ever liquid type you are fishing. If the cleints are already fishing. It will reset all counters for that client.

CTRL+NumberPad3 Mass Stop of all clients
This will stop all clients from fishing. They will not finish there last cast sorry.

NumberPad* Reload command
If for what ever reason you need to reload the bot. Just use this hotkey. Do not hold this key. If you do it will open alot of the same clients.

NumberPad2 Enable and Disable Anti-AFK on Single client.
Bring the client you wish to toggle this on and off to the foreground and just hit the button. It will say on and off on the gui.

Usage
How to use the GUI Controls.
How to start/stop Single client?

• To Start Single Client. Select the Client from the list. Hit Start/Restart Selected Client
• To Stop Single Client. Select the Client from the list. Hit Stop Selected Client
• To Start All Clients. Just the Start/Restart All Clients Button.
• To Stop All Clients. Just hit the Stop All Clients button.
• To wipe out all Client Data hit the Wipe all clients Data. This will remove them from the list and the active scan will pick them back up as if the client was just started.
• To bring the client to the foreground. Just Select the Client on the list. Then hit the button Bring selected client to foreground.
• To config the bot hit the Config button.(There is not much to config so I left this as a place holder. For when the config is needed.)
• If you like what you see and like to help make me want to keep releasing updates hit the donate button.

If the bot detects that is is not fishing a screen will come up with the pID. You can then just click that screen to stop that client from fishing. it will bring that window to the foreground so you know which one it is if running alot. Some times the bot might glitch and not cast so you can ignore the first one you see. But if it comes up over and over you might want to check it to resolve the issue it is having.

If you wish to fish in a new liquid type just stop the bot on that client and then start it up again facing the new liquid type.

How to use the bootdrop/decon fuctions
Put a loot collector under the water. Hit E while facing it to open that loot collector screen. Do not hit b to open bag other wise the loot collect will not work. With that setup done just start the bot up like normal.

Config GUI
In side this GUI you will see options for various things you can tweak.
Here you also can enable the boot drop. There are 3 ways to trigger the boot drop. You might not need all 3 but you can use all 3. Just tweak the settings till you get it how you like. Also there is a Ignore slot config screen. Just hit the button in the config. This will bring it up. Just check the slots you wish for it to ignore.
Notes about bootdrop. You need to be in windowed mode for this to work.


Known Issues
It doesn't go the to kitchen and make me a sandwich.
So if you see any other problem please do report them.

List of current features

1. The bot will work with more then one client. No need to run more then one exe for each client.
2. More efficient at scanning memory. It wont try and scan all 3 types of liquids only the type of which it started fishing in first.
3. It checks to see if you have a lure in the water between 8 and 11seconds or more then 45seconds after cast. No need to wait the 40 to 45 seconds like most bots to tell the user it is not fishing.
4. Memory scan wont start till the lure has been in the water for more then 12 seconds. This saves on cpu usage with the bot it self.
5. Better error handling. Meaning it should not cast for no reason and waste lures.
6. No more loops for main thread. So you can stop and start with out having to reload the fishing bot it self.
7. Open source. I do not care if others have the source. But just remember to give credit where credit is due.
8. Window title change. With info of the pID of that client and if it is fishing or not.
9. There are others but can't seem to think of anymore atm I will fill it in as the come in.
10. Built in boot drop. It now has it.
11. Various options you can now config to tweak it.
12. Auto afk/Close client if the bot detects it stops fishing

To-Do List

1. Add Decons(I added bootdrop but I have not added decons sorry I will work on adding it soon.)
2. Custom hotkeys
3. and what ever else you guys request.

Also remember any questions or comments or just like to say thanks post below and give thanks to the opening post.

Donations are not needed but always welcomed as well. Seeing a donatin come in makes me want to keep updating my stuff.
Feel free to donate by clicking the image below
[IMG]https://img.widgetbo*****m/thumbs/13d7c148-ea72-40fc-903f-2f3ac15d55e6.png[/IMG]

 

Version 1.4.2

• Changed the memory scan timer from 1000 to 400. This might solve a issues with missing a bite but not 100% sure.
• Added backend config MemoryScanTimer this is to change the timer at which memory is scanned. You will need to edit the ini and reload the bot. This is a backend setting.
• Fixed a bug with mass start. My bad I left some var changed around here and forgot to update them.

Version 1.4.1

• Remove recast flag if you stop casting rather then just the fish flag.
• GUI window will no longer wipe its stats when you stop the bot(s).
• Added hardcoded config version. This way if you end up using the sane ini file and the config versions do not match it will delete the old one and remake it. No more Error on loading.
• Removed the wait time from behind the reelin. This is to improve speed just incase another one bites at the same time.
• Added in the ini settings a way to edit the wait time before reeling in. Random number using x-y Example 100-200 means it will randomly pick between 100 and 200 milliseconds
• Tweaked the liquid type for being Unknown. If you start to fish in unknown and then the erorr handling that scans fishing state picks it up. It will correct the liquid type.
• TypeO in the GUI Cought should have been Caught. Funny no one pointed it out.
• Rewrote how I get addresses. No need to have 6 fuctions basicly doing samething.
• Offsets are hard coded in to the ini file. If for what ever reason they break like they did last Tuesday it will be easier to update.

Version 1.4

• New feature Decon along with bootdrop. If you run in to issues with this post on my thread.
• Updated pointer address to newest patch. Along new offsets for liquid type. Sorry it took so long.
• Due to a possible security risk I will no longer be changing the caption on the trove window just incase.
• Other minor changes. More to come for 1.4.1

 

Version 1.0
initial release no logs to be seen.

Version 1.0.1
Tweaked the detection time of liquids to help detect liquid type if client lags.

Version 1.1

• With 1.1 I rewrote most of it again. Major clean up. Compare the 2 source codes and you can see what I have been threw.
  
• General
  The way it started fishing was by adding the client to the array. It no longer is used. It now uses a active flag.
  Added a way to add info for the bot for later use. I wont go in to major details in this as it is used backend mostly and for the gui when I add it.
  
• Error handling
  Major improvement on error handling.
  Those changes are as follow.
  No more spam of the Error screen. *Sorry about that.*
  Error screen wont pop up just because it errors once.
  It now takes 3 ticks for it to pop up. 3 ticks are about 8 to 11 secs apart. That means it tried 3 times within 24 to 45secs to recast before telling the user about it.
  Clicking the error gui now stops all clients that have reported errors. This is to prevent over lapping error screens.
  Rewrote how error handling was buffer. No more array for it.
  
• Recast
  Rewrote the recast to fit new format of buffer. *means no longer in its own array like error
  
• There might have been other changes but I can't think of any more. I will make sure to write all this down next time as I the changes.

Version 1.2

• Custom Icon, Subject to change.
• Changed the memory scan to tell if it reeling in. If so it wont trigger the whole memory scan on that client. Helps to keep cpu usage down.
• Feature Added automatic stop if bot errors out for more then 10 times in a row. So if you are not able to address the problem or not at the computer. It wont try and keep spamming lures. It disables fishing for that client off and then enables Anti-AFKflag for that client. If Flag is enabled it will keep you from disconnecting.
• Fixed if running one client the client would not show the pID on title change.
• Cleared up the unused var that I could see
• Added Anti-Afk, This you can toggled with a hotkey. If toggled on it will send Right CTRL to client to prevent being disconnected. (The default key will be NumberPad2 and CTRL+NumerPad2 for mass off)
• Change the timers on recast. This should speed things up a bit but still offer a real person feel. If you wish to speed things up just remove the randsleep at the start of the recast.
• Changed the key press delays for casting/recasting, From between 86-100 to 90-150 for a more real key press feel. You wont notice this at all. Or at lest I never did.
• Custom Icon, So you can tell the icon on taskbar.
• Fixed the stop all command. It now properly uses the fishing state flag.
• Added Main GUI mostly for info but has client controls as well, All buttons should work.
• Added Ini Setting RecastWaitTime for recast. To set pick lowest and highest number and it will randomly pick a number between. Example 190-1500 it will pick a number between the 2 values.
• And other minor tweaks here and there.

Version 1.2.1Hotfix

• Fixed a issue when spamming the hotkeys/gui buttons. It would some times set the data on the wrong client.

Version 1.2.2Hotfix

• Fixed the donate button on the GUI. It should work now my bad.

Version 1.3

• Added config for error handling. Retry times/Retry trys for auto stop and add to afk or close.
• Added Auto Close feature instead of auto afk. This can be toggled in side the new config gui.
• Added in to config. The time when the memory scan starts. Reducing this can cause more cpu usage. But will need to be lowered during events like 2x fish.
• Added config gui along with the slot selector ui used by bootdrop.
• Mew feature Bootdrop. Yep it has my version of boot drop. If someone else comes up with a better one or better idea to improve it please do share. The way it is setup is it can use any bootdrop script as long as it returns the right data back to the fishing bot.

Version 1.3.1

• Fixed a issue where sometimes the bot would stop fishing. My bad I did not notice this till I ran it over night for the frist time.
• Fixed issues with config file. People that were to lazy to delete the old one. I added error handling for default settings.
• Updated offsets.

 

Due to how many lines are in the source and required image files now. I will be no longer be posting it on the thread. You can find the source in side the rar file once approved..

https://www.virustotal.com/en/file/a...is/1443206482/

SHA256:	a7cd8f07d6c676056bdaa4870f63472a482c8563102e1745467f7c46c9ed51b6
File name:	Nippy's Fish Botv1.4.2.rar
Detection ratio:	0 / 56
Analysis date:	2015-09-25 18:41:22 UTC ( 0 minutes ago )

[Yemiez]

File is clean


/Approved

[bobbetter]

Thanks your boot drop and decon doesn't really work for me so I just use LazyFishing 1.8's while yours is running. Surprisingly efficient.

[reppin]

Thanks your boot drop and decon doesn't really work for me so I just use LazyFishing 1.8's while yours is running. Surprisingly efficient.

Read the change logs please.

Version 1.4.2
Changed the memory scan timer from 1000 to 400. This might solve a issues with missing a bite but not 100% sure.
Added backend config MemoryScanTimer this is to change the timer at which memory is scanned. You will need to edit the ini and reload the bot. This is a backend setting.
Fixed a bug with mass start. My bad I left some var changed around here and forgot to update them.

[fuguets]

Read the change logs please.

Version 1.4.2
Changed the memory scan timer from 1000 to 400. This might solve a issues with missing a bite but not 100% sure.
Added backend config MemoryScanTimer this is to change the timer at which memory is scanned. You will need to edit the ini and reload the bot. This is a backend setting.
Fixed a bug with mass start. My bad I left some var changed around here and forgot to update them.

...

Can you please post a picture of how exactly is your screen when boot drop and decon is activated ?
I think that the resize of my window might be the problem!

EDIT: Se my picture, every time that BOOt drop starts, when it try to drop something that isn't a boot, the message appears and all drops after that is failed.

[Jazz1e]

This doesn't seem to fish at all.

[reppin]

...

Can you please post a picture of how exactly is your screen when boot drop and decon is activated ?
I think that the resize of my window might be the problem!

EDIT: Se my picture, every time that BOOt drop starts, when it try to drop something that isn't a boot, the message appears and all drops after that is failed.

What res are you using??

- - - Updated - - -

This doesn't seem to fish at all.

did you try to hit the start button? hit numberpad1 with the client open.

[fuguets]

What res are you using??

- - - Updated - - -



did you try to hit the start button? hit numberpad1 with the client open.

Windowed..and the bot do the work of resize the screen. However looks like it miss the point of clic.

[reppin]

Windowed..and the bot do the work of resize the screen. However looks like it miss the point of clic.

are you using a VM?

[Lianthe]

Thanks for sharing

[maskuliini]

Early reel-ins are really bad now, how do I fix that? And btw the reel-in(caught) counter goes up even though it reels in no fish.

[reppin]

Early reel-ins are really bad now, how do I fix that? And btw the reel-in(caught) counter goes up even though it reels in no fish.

I don't see how. The reelin will only triger when the memory reads 1. Every bot out there uses the same offsets I don't see how it can cause a issue. Only thing I can think of is your computer is so laggy that it wont work. If you are using a VM that might be the cause.

[fuguets]

are you using a VM?

No, i'm not!

By the way, I noticed that the size of the window, when resized by your Bot is different from the size of Lazyfishing....any chance they should the same ?

[maskuliini]

I don't see how. The reelin will only triger when the memory reads 1. Every bot out there uses the same offsets I don't see how it can cause a issue. Only thing I can think of is your computer is so laggy that it wont work. If you are using a VM that might be the cause.

I have absolutely no lag, with other bots I've had no issue.

[reppin]

I have absolutely no lag, with other bots I've had no issue.

Well, All in all this at the core is the same. As it uses the same memory addresses. I don't see why it would reelin early at all. You can check the code your self and look.

Well, Lets try this install autohotkey.
Save the script below as whatever.ahk in side the fishing bot folder.
Try running this tell me what happens.

https://ts3.shackx.net/bot/Nippysfishing.ahk

Only thing I changed here was the error handling. It wont triger between 8 to 12 secs but instead only trigger at 45+secs.

Also you never answered me are you running it on a VM??