wot is wrom with hack? (VB6)

wot is wrong with by codes? (i'm using VB 6) if i press a hotkey (in numtab) nothing hapens

( all timers are interfall 1 )

Here some codes:

rivate Sub Timer1_Timer()
If GetKeyPress(vbKeyNumpad1) Then
Call WriteALong("WarRock", &H7DB120, 1120403456)
End If
End Sub

__________________________________________________

Private Sub Timer2_Timer()
If GetKeyPress(vbKeyNumpad2) Then
Call WriteALong("WarRock", &H90DC6F, 0)
Call WriteALong("WarRock", &H90DC70, 0)
Call WriteALong("WarRock", &H90DC71, 0)
Call WriteALong("WarRock", &H90DC72, 0)
Call WriteALong("WarRock", &H90DC73, 0)
Call WriteALong("WarRock", &H90DC74, 0)
Call WriteALong("WarRock", &H90DC75, 0)
Call WriteALong("WarRock", &H90DC76, 0)
Call WriteALong("WarRock", &H90DC77, 0)
Call WriteALong("WarRock", &H90DC78, 0)
Call WriteALong("WarRock", &H90DC79, 0)
End If
End Sub

__________________________________________________ ___

Private Sub Timer3_Timer()
If GetKeyPress(vbKeyNumpad3) Then
Call WriteALong("WarRock", &HB20E40, 0)
Call WriteALong("WarRock", &HDED290, 0)
End If
End Sub

Ooohh No

you can see the adresses

(NP got them from a site)

, Jordy

fist line:
rivate Sub Timer1_Timer()
Private Sub Timer1_Timer()

Or 's that just a copy fault =.='

Originally Posted by smartie

fist line:
rivate Sub Timer1_Timer()
Private Sub Timer1_Timer()

Or 's that just a copy fault =.='

just a copy fault

I'm too tired too read it =.='
Someone else help this guy/girl.

do

Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer

in front, for activate hotkeys

You are only setting the value... you need to freeze it... so you need 1 timer for the hotkeys and 1 timer each for each value you want to freeze... example :

Code:

Private Sub Timer1_Timer()

If GetKeyPress(vbKeyNumpad1) Then 'Stamina
    Timer2.Interval = 1
End If

If GetKeyPress(vbKeyNumpad2) Then 'Perfect Aim
    Timer3.Interval = 1
End If

End Sub

Private Sub Timer2_Timer()

Call WriteALong("Warrock", &H7DB120, 1120403456)

End Sub

Private Sub Timer3_Timer()

    Call WriteALong("WarRock", &H90DC6D, 0)
    Call WriteALong("WarRock", &H90DC6E, 0)
    Call WriteALong("WarRock", &H90DC6F, 0)
    Call WriteALong("WarRock", &H90DC70, 0)
    Call WriteALong("WarRock", &H90DC71, 0)
    Call WriteALong("WarRock", &H90DC72, 0)
    Call WriteALong("WarRock", &H90DC73, 0)
    Call WriteALong("WarRock", &H90DC76, 0)
    Call WriteALong("WarRock", &H90DC77, 0)
    Call WriteALong("WarRock", &H90DC78, 0)
    Call WriteALong("WarRock", &H90DC79, 0)
    Call WriteALong("WarRock", &H90DC7A, 0)

End Sub

Reply if it worked...

Originally Posted by kingkicker8

do

Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer

in front, for activate hotkeys

That's actually not necessary if you do it the way I showed...

to do If GetKeyPress u need to do this at beginning of the code:

Code:

Private Declare Function GetKeyPress Lib "user32" Alias "GetAsyncKeyState" (ByVal key As Long) As Integer

Yes of course that as well... but that was not his problem... his problem was setting the value... he did not freeze it.

yo mains3rv3r,do you know how i can make the same hotkey turn the code on and off,likek i know how to do If getkeypress(vbkeyRButton)is my mouse hotkey,but how i make it turn it off,if you hit rbutton again

if getasynckeystate (113) <> 0 then
if timer1.interval = 1 then
timer1.interval = 0
else
timer1.interval = 1
End If
End If

Hot keys this way kind of suck though. At least they do when I try them. Like sometimes I'd press them and they'd turn on then off because I pressed to slow or fast or w/e, any ways If you want good hot keys try this. It will turn it on/off if the key is pressed but won't change it if they key is being held down.

Code:

Private Sub Timer1_Timer()
Static P As Byte 'static means value doesn't reset when code restarts
 If GetAsyncKeyState(#) <> 0 Then
        If P > 0 Then P = 2 Else P = 1 'check if key is pressed or held down
    Else
        P = 0 'sets p to 0 if it isn't pressed
    End If
    If P = 1 Then  'If key is pressed
    'Insert Code to active and deactivate timer.
    End If
    End If
End Sub

Just put the number of the key where the # sign is and put your code where the 'Inseter Code thing is. By the way Im not taking credit for figuring this out. I found it on a site awhile ago... I'll try finding the site for credits.

wot is wrom with hack? (VB6)

Post a Reply

Similar Threads

Tags for this Thread