[Release] How to make bunkers SUPER EASY!!

How To Create Bunkers So Easily You Will Probably S#!t Your Pants!!

DONT FORGET TO THANK +REP ME

These building functions will allow you to create bunkers with 2 coordinates in each functions. This challenged my brain power:

CreateElevater(enter, exit, angle) - enter: position to enter at | exit: position of exit | angle: player angle on exit

CreateBlocks(pos, angle) - pos: position of block | angle: angle of block

CreateDoors(open, close, angle, size, height, hp, range) - open: position of open | close: position of close | angle: angle of door | size: blocks long | height: blocks high | hp: health | range: range to use door

CreateRamps(top, bottom) - top: top of ramp | bottom: bottom of ramp

CreateGrids(corner1, corner2, angle) - corner1: position of one corner | corner2: position of opposite corner | angle: rotation around corner 1

CreateWalls(start, end) - start: start of wall, lowest(z) | end: end of wall, highest(z)

CreateCluster(amount, pos, radius) - amount: number of random blocks | pos: center | radius: radius around center

Special Features:
CreateWalls is made to create perfect corners just 4 coordinates will make u a perfect shape

CreateDoors can be used to make trapdoors. To use (90, y, z) angle for an upright door, (0, y, z) for a trapdoor

CreateRamp is a godly and less block using alternative to stairs

Code:

Code:

CreateElevator(enter, exit, angle) 
{ 
        flag = spawn( "script_model", enter ); 
        flag setModel( level.elevator_model["enter"] ); 
        wait 0.01; 
        flag = spawn( "script_model", exit ); 
        flag setModel( level.elevator_model["exit"] ); 
        wait 0.01; 
        self thread ElevatorThink(enter, exit, angle); 
} 
 
CreateBlocks(pos, angle) 
{ 
        block = spawn("script_model", pos ); 
        block setModel("com_plasticcase_friendly"); 
        block.angles = angle; 
        block Solid(); 
        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
        wait 0.01; 
} 
 
CreateDoors(open, close, angle, size, height, hp, range) 
{ 
        offset = (((size / 2) - 0.5) * -1); 
        center = spawn("script_model", open ); 
        for(j = 0; j < size; j++){ 
                door = spawn("script_model", open + ((0, 30, 0) * offset)); 
                door setModel("com_plasticcase_enemy"); 
                door Solid(); 
                door CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                door EnableLinkTo(); 
                door LinkTo(center); 
                for(h = 1; h < height; h++){ 
                        door = spawn("script_model", open + ((0, 30, 0) * offset) - ((70, 0, 0) * h)); 
                        door setModel("com_plasticcase_enemy"); 
                        door Solid(); 
                        door CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                        door EnableLinkTo(); 
                        door LinkTo(center); 
                } 
                offset += 1; 
        } 
        center.angles = angle; 
        center.state = "open"; 
        center.hp = hp; 
        center.range = range; 
        center thread DoorThink(open, close); 
        center thread DoorUse(); 
        center thread ResetDoors(open, hp); 
        wait 0.01; 
} 
 
CreateRamps(top, bottom) 
{ 
        D = Distance(top, bottom); 
        blocks = roundUp(D/30); 
        CX = top[0] - bottom[0]; 
        CY = top[1] - bottom[1]; 
        CZ = top[2] - bottom[2]; 
        XA = CX/blocks; 
        YA = CY/blocks; 
        ZA = CZ/blocks; 
        CXY = Distance((top[0], top[1], 0), (bottom[0], bottom[1], 0)); 
        Temp = VectorToAngles(top - bottom); 
        BA = (Temp[2], Temp[1] + 90, Temp[0]); 
        for(b = 0; b < blocks; b++){ 
                block = spawn("script_model", (bottom + ((XA, YA, ZA) * B))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = BA; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.01; 
        } 
        block = spawn("script_model", (bottom + ((XA, YA, ZA) * blocks) - (0, 0, 5))); 
        block setModel("com_plasticcase_friendly"); 
        block.angles = (BA[0], BA[1], 0); 
        block Solid(); 
        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
        wait 0.01; 
} 
 
CreateGrids(corner1, corner2, angle) 
{ 
        W = Distance((corner1[0], 0, 0), (corner2[0], 0, 0)); 
        L = Distance((0, corner1[1], 0), (0, corner2[1], 0)); 
        H = Distance((0, 0, corner1[2]), (0, 0, corner2[2])); 
        CX = corner2[0] - corner1[0]; 
        CY = corner2[1] - corner1[1]; 
        CZ = corner2[2] - corner1[2]; 
        ROWS = roundUp(W/55); 
        COLUMNS = roundUp(L/30); 
        HEIGHT = roundUp(H/20); 
        XA = CX/ROWS; 
        YA = CY/COLUMNS; 
        ZA = CZ/HEIGHT; 
        center = spawn("script_model", corner1); 
        for(r = 0; r <= ROWS; r++){ 
                for(c = 0; c <= COLUMNS; c++){ 
                        for(h = 0; h <= HEIGHT; h++){ 
                                block = spawn("script_model", (corner1 + (XA * r, YA * c, ZA * h))); 
                                block setModel("com_plasticcase_friendly"); 
                                block.angles = (0, 0, 0); 
                                block Solid(); 
                                block LinkTo(center); 
                                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                                wait 0.01; 
                        } 
                } 
        } 
        center.angles = angle; 
} 
 
CreateWalls(start, end) 
{ 
        D = Distance((start[0], start[1], 0), (end[0], end[1], 0)); 
        H = Distance((0, 0, start[2]), (0, 0, end[2])); 
        blocks = roundUp(D/55); 
        height = roundUp(H/30); 
        CX = end[0] - start[0]; 
        CY = end[1] - start[1]; 
        CZ = end[2] - start[2]; 
        XA = (CX/blocks); 
        YA = (CY/blocks); 
        ZA = (CZ/height); 
        TXA = (XA/4); 
        TYA = (YA/4); 
        Temp = VectorToAngles(end - start); 
        Angle = (0, Temp[1], 90); 
        for(h = 0; h < height; h++){ 
                block = spawn("script_model", (start + (TXA, TYA, 10) + ((0, 0, ZA) * h))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = Angle; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.001; 
                for(i = 1; i < blocks; i++){ 
                        block = spawn("script_model", (start + ((XA, YA, 0) * i) + (0, 0, 10) + ((0, 0, ZA) * h))); 
                        block setModel("com_plasticcase_friendly"); 
                        block.angles = Angle; 
                        block Solid(); 
                        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                        wait 0.001; 
                } 
                block = spawn("script_model", ((end[0], end[1], start[2]) + (TXA * -1, TYA * -1, 10) + ((0, 0, ZA) * h))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = Angle; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.001; 
        } 
} 
 
CreateCluster(amount, pos, radius) 
{ 
        for(i = 0; i < amount; i++) 
        { 
                half = radius / 2; 
                power = ((randomInt(radius) - half), (randomInt(radius) - half), 500); 
                block = spawn("script_model", pos + (0, 0, 1000) ); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = (90, 0, 0); 
                block PhysicsLaunchServer((0, 0, 0), power); 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                block thread ResetCluster(pos, radius); 
                wait 0.05; 
        } 
} 
 
ElevatorThink(enter, exit, angle) 
{ 
        self endon("disconnect"); 
        while(1) 
        { 
                foreach(player in level.players) 
                { 
                        if(Distance(enter, player.origin) <= 50){ 
                                player SetOrigin(exit); 
                                player SetPlayerAngles(angle); 
                        } 
                } 
                wait .25; 
        } 
} 
 
DoorThink(open, close) 
{ 
        while(1) 
        { 
                if(self.hp > 0){ 
                        self waittill ( "triggeruse" , player ); 
                        if(player.team == "allies"){ 
                                if(self.state == "open"){ 
                                        self MoveTo(close, level.doorwait); 
                                        wait level.doorwait; 
                                        self.state = "close"; 
                                        continue; 
                                } 
                                if(self.state == "close"){ 
                                        self MoveTo(open, level.doorwait); 
                                        wait level.doorwait; 
                                        self.state = "open"; 
                                        continue; 
                                } 
                        } 
                        if(player.team == "axis"){ 
                                if(self.state == "close"){ 
                                        self.hp--; 
                                        player iPrintlnBold("HIT"); 
                                        wait 1; 
                                        continue; 
                                } 
                        } 
                } else { 
                        if(self.state == "close"){ 
                                self MoveTo(open, level.doorwait); 
                        } 
                        self.state = "broken"; 
                        wait .5; 
                } 
        } 
} 
 
DoorUse(range) 
{ 
        self endon("disconnect"); 
        while(1) 
        { 
                foreach(player in level.players) 
                { 
                        if(Distance(self.origin, player.origin) <= self.range){ 
                                if(player.team == "allies"){ 
                                        if(self.state == "open"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Close ^7the door"; 
                                        } 
                                        if(self.state == "close"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Open ^7the door"; 
                                        } 
                                        if(self.state == "broken"){ 
                                                player.hint = "^1Door is Broken"; 
                                        } 
                                } 
                                if(player.team == "axis"){ 
                                        if(self.state == "close"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Attack ^7the door"; 
                                        } 
                                        if(self.state == "broken"){ 
                                                player.hint = "^1Door is Broken"; 
                                        } 
                                } 
                                if(player.buttonPressed[ "+activate" ] == 1){ 
                                        player.buttonPressed[ "+activate" ] = 0; 
                                        self notify( "triggeruse" , player); 
                                } 
                        } 
                } 
                wait .045; 
        } 
} 
 
ResetDoors(open, hp) 
{ 
        while(1) 
        { 
                level waittill("RESETDOORS"); 
                self.hp = hp; 
                self MoveTo(open, level.doorwait); 
                self.state = "open"; 
        } 
} 
 
ResetCluster(pos, radius) 
{ 
        wait 5; 
        self RotateTo(((randomInt(36)*10), (randomInt(36)*10), (randomInt(36)*10)), 1); 
        level waittill("RESETCLUSTER"); 
        self thread CreateCluster(1, pos, radius); 
        self delete(); 
} 
 
roundUp( floatVal ) 
{ 
        if ( int( floatVal ) != floatVal ) 
                return int( floatVal+1 ); 
        else 
                return int( floatVal ); 
}

Example:

Code:

Underpass() 
{ 
        CreateElevator((-415, 3185, 392), (-1630, 3565, 1035), (0, 180, 0)); 
        CreateBlocks((1110, 1105, 632), (90, 0, 0)); 
        CreateBlocks((-2740, 3145, 1100), (90, 0, 0)); 
        CreateBlocks((2444, 1737, 465), (90, 0, 0)); 
        CreateWalls((-1100, 3850, 1030), (-1100, 3085, 1160)); 
        CreateWalls((-2730, 3453, 1030), (-2730, 3155, 1150)); 
        CreateWalls((-2730, 3155, 1030), (-3330, 3155, 1180)); 
        CreateWalls((-3330, 3155, 1030), (-3330, 3890, 1180)); 
        CreateWalls((-3330, 3890, 1030), (-2730, 3890, 1180)); 
        CreateWalls((-2730, 3890, 1030), (-2730, 3592, 1150)); 
        CreateWalls((-2730, 3890, 1150), (-2730, 3155, 1180)); 
        CreateDoors((-2730, 3400, 1052), (-2730, 3522.5, 1052), (90, 180, 0), 4, 2, 20, 75); 
        CreateRamps((-3285, 3190, 1125), (-3285, 3353, 1030)); 
        CreateRamps((-3285, 3855, 1125), (-3285, 3692, 1030)); 
        CreateGrids((-2770, 3190, 1120), (-3230, 3190, 1120), (0, 0, 0)); 
        CreateGrids((-2770, 3855, 1120), (-3230, 3855, 1120), (0, 0, 0)); 
        CreateGrids((-2770, 3220, 1120), (-2770, 3825, 1120), (0, 0, 0)); 
        CreateCluster(20, (-3030, 3522.5, 1030), 250); 
}

Credits:
Killingdyl-For making/finding this
Me-For uploading on mpgh

Originally Posted by soccerguy

How To Create Bunkers So Easily You Will Probably S#!t Your Pants!!

These buidling functions will allow you to create bunkers with 2 coordinates in each functions. This challenged my brain power:

CreateElevater(enter, exit, angle) - enter: position to enter at | exit: position of exit | angle: player angle on exit

CreateBlocks(pos, angle) - pos: position of block | angle: angle of block

CreateDoors(open, close, angle, size, height, hp, range) - open: position of open | close: position of close | angle: angle of door | size: blocks long | height: blocks high | hp: health | range: range to use door

CreateRamps(top, bottom) - top: top of ramp | bottom: bottom of ramp

CreateGrids(corner1, corner2, angle) - corner1: position of one corner | corner2: position of opposite corner | angle: rotation around corner 1

CreateWalls(start, end) - start: start of wall, lowest(z) | end: end of wall, highest(z)

CreateCluster(amount, pos, radius) - amount: number of random blocks | pos: center | radius: radius around center

Special Features:
CreateWalls is made to create perfect corners just 4 coordinates will make u a perfect shape

CreateDoors can be used to make trapdoors. To use (90, y, z) angle for an upright door, (0, y, z) for a trapdoor

CreateRamp is a godly and less block using alternative to stairs

Code:

Code:

CreateElevator(enter, exit, angle) 
{ 
        flag = spawn( "script_model", enter ); 
        flag setModel( level.elevator_model["enter"] ); 
        wait 0.01; 
        flag = spawn( "script_model", exit ); 
        flag setModel( level.elevator_model["exit"] ); 
        wait 0.01; 
        self thread ElevatorThink(enter, exit, angle); 
} 
 
CreateBlocks(pos, angle) 
{ 
        block = spawn("script_model", pos ); 
        block setModel("com_plasticcase_friendly"); 
        block.angles = angle; 
        block Solid(); 
        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
        wait 0.01; 
} 
 
CreateDoors(open, close, angle, size, height, hp, range) 
{ 
        offset = (((size / 2) - 0.5) * -1); 
        center = spawn("script_model", open ); 
        for(j = 0; j < size; j++){ 
                door = spawn("script_model", open + ((0, 30, 0) * offset)); 
                door setModel("com_plasticcase_enemy"); 
                door Solid(); 
                door CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                door EnableLinkTo(); 
                door LinkTo(center); 
                for(h = 1; h < height; h++){ 
                        door = spawn("script_model", open + ((0, 30, 0) * offset) - ((70, 0, 0) * h)); 
                        door setModel("com_plasticcase_enemy"); 
                        door Solid(); 
                        door CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                        door EnableLinkTo(); 
                        door LinkTo(center); 
                } 
                offset += 1; 
        } 
        center.angles = angle; 
        center.state = "open"; 
        center.hp = hp; 
        center.range = range; 
        center thread DoorThink(open, close); 
        center thread DoorUse(); 
        center thread ResetDoors(open, hp); 
        wait 0.01; 
} 
 
CreateRamps(top, bottom) 
{ 
        D = Distance(top, bottom); 
        blocks = roundUp(D/30); 
        CX = top[0] - bottom[0]; 
        CY = top[1] - bottom[1]; 
        CZ = top[2] - bottom[2]; 
        XA = CX/blocks; 
        YA = CY/blocks; 
        ZA = CZ/blocks; 
        CXY = Distance((top[0], top[1], 0), (bottom[0], bottom[1], 0)); 
        Temp = VectorToAngles(top - bottom); 
        BA = (Temp[2], Temp[1] + 90, Temp[0]); 
        for(b = 0; b < blocks; b++){ 
                block = spawn("script_model", (bottom + ((XA, YA, ZA) * B))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = BA; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.01; 
        } 
        block = spawn("script_model", (bottom + ((XA, YA, ZA) * blocks) - (0, 0, 5))); 
        block setModel("com_plasticcase_friendly"); 
        block.angles = (BA[0], BA[1], 0); 
        block Solid(); 
        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
        wait 0.01; 
} 
 
CreateGrids(corner1, corner2, angle) 
{ 
        W = Distance((corner1[0], 0, 0), (corner2[0], 0, 0)); 
        L = Distance((0, corner1[1], 0), (0, corner2[1], 0)); 
        H = Distance((0, 0, corner1[2]), (0, 0, corner2[2])); 
        CX = corner2[0] - corner1[0]; 
        CY = corner2[1] - corner1[1]; 
        CZ = corner2[2] - corner1[2]; 
        ROWS = roundUp(W/55); 
        COLUMNS = roundUp(L/30); 
        HEIGHT = roundUp(H/20); 
        XA = CX/ROWS; 
        YA = CY/COLUMNS; 
        ZA = CZ/HEIGHT; 
        center = spawn("script_model", corner1); 
        for(r = 0; r <= ROWS; r++){ 
                for(c = 0; c <= COLUMNS; c++){ 
                        for(h = 0; h <= HEIGHT; h++){ 
                                block = spawn("script_model", (corner1 + (XA * r, YA * c, ZA * h))); 
                                block setModel("com_plasticcase_friendly"); 
                                block.angles = (0, 0, 0); 
                                block Solid(); 
                                block LinkTo(center); 
                                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                                wait 0.01; 
                        } 
                } 
        } 
        center.angles = angle; 
} 
 
CreateWalls(start, end) 
{ 
        D = Distance((start[0], start[1], 0), (end[0], end[1], 0)); 
        H = Distance((0, 0, start[2]), (0, 0, end[2])); 
        blocks = roundUp(D/55); 
        height = roundUp(H/30); 
        CX = end[0] - start[0]; 
        CY = end[1] - start[1]; 
        CZ = end[2] - start[2]; 
        XA = (CX/blocks); 
        YA = (CY/blocks); 
        ZA = (CZ/height); 
        TXA = (XA/4); 
        TYA = (YA/4); 
        Temp = VectorToAngles(end - start); 
        Angle = (0, Temp[1], 90); 
        for(h = 0; h < height; h++){ 
                block = spawn("script_model", (start + (TXA, TYA, 10) + ((0, 0, ZA) * h))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = Angle; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.001; 
                for(i = 1; i < blocks; i++){ 
                        block = spawn("script_model", (start + ((XA, YA, 0) * i) + (0, 0, 10) + ((0, 0, ZA) * h))); 
                        block setModel("com_plasticcase_friendly"); 
                        block.angles = Angle; 
                        block Solid(); 
                        block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                        wait 0.001; 
                } 
                block = spawn("script_model", ((end[0], end[1], start[2]) + (TXA * -1, TYA * -1, 10) + ((0, 0, ZA) * h))); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = Angle; 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                wait 0.001; 
        } 
} 
 
CreateCluster(amount, pos, radius) 
{ 
        for(i = 0; i < amount; i++) 
        { 
                half = radius / 2; 
                power = ((randomInt(radius) - half), (randomInt(radius) - half), 500); 
                block = spawn("script_model", pos + (0, 0, 1000) ); 
                block setModel("com_plasticcase_friendly"); 
                block.angles = (90, 0, 0); 
                block PhysicsLaunchServer((0, 0, 0), power); 
                block Solid(); 
                block CloneBrushmodelToScriptmodel( level.airDropCrateCollision ); 
                block thread ResetCluster(pos, radius); 
                wait 0.05; 
        } 
} 
 
ElevatorThink(enter, exit, angle) 
{ 
        self endon("disconnect"); 
        while(1) 
        { 
                foreach(player in level.players) 
                { 
                        if(Distance(enter, player.origin) <= 50){ 
                                player SetOrigin(exit); 
                                player SetPlayerAngles(angle); 
                        } 
                } 
                wait .25; 
        } 
} 
 
DoorThink(open, close) 
{ 
        while(1) 
        { 
                if(self.hp > 0){ 
                        self waittill ( "triggeruse" , player ); 
                        if(player.team == "allies"){ 
                                if(self.state == "open"){ 
                                        self MoveTo(close, level.doorwait); 
                                        wait level.doorwait; 
                                        self.state = "close"; 
                                        continue; 
                                } 
                                if(self.state == "close"){ 
                                        self MoveTo(open, level.doorwait); 
                                        wait level.doorwait; 
                                        self.state = "open"; 
                                        continue; 
                                } 
                        } 
                        if(player.team == "axis"){ 
                                if(self.state == "close"){ 
                                        self.hp--; 
                                        player iPrintlnBold("HIT"); 
                                        wait 1; 
                                        continue; 
                                } 
                        } 
                } else { 
                        if(self.state == "close"){ 
                                self MoveTo(open, level.doorwait); 
                        } 
                        self.state = "broken"; 
                        wait .5; 
                } 
        } 
} 
 
DoorUse(range) 
{ 
        self endon("disconnect"); 
        while(1) 
        { 
                foreach(player in level.players) 
                { 
                        if(Distance(self.origin, player.origin) <= self.range){ 
                                if(player.team == "allies"){ 
                                        if(self.state == "open"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Close ^7the door"; 
                                        } 
                                        if(self.state == "close"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Open ^7the door"; 
                                        } 
                                        if(self.state == "broken"){ 
                                                player.hint = "^1Door is Broken"; 
                                        } 
                                } 
                                if(player.team == "axis"){ 
                                        if(self.state == "close"){ 
                                                player.hint = "Press ^3[{+activate}] ^7to ^2Attack ^7the door"; 
                                        } 
                                        if(self.state == "broken"){ 
                                                player.hint = "^1Door is Broken"; 
                                        } 
                                } 
                                if(player.buttonPressed[ "+activate" ] == 1){ 
                                        player.buttonPressed[ "+activate" ] = 0; 
                                        self notify( "triggeruse" , player); 
                                } 
                        } 
                } 
                wait .045; 
        } 
} 
 
ResetDoors(open, hp) 
{ 
        while(1) 
        { 
                level waittill("RESETDOORS"); 
                self.hp = hp; 
                self MoveTo(open, level.doorwait); 
                self.state = "open"; 
        } 
} 
 
ResetCluster(pos, radius) 
{ 
        wait 5; 
        self RotateTo(((randomInt(36)*10), (randomInt(36)*10), (randomInt(36)*10)), 1); 
        level waittill("RESETCLUSTER"); 
        self thread CreateCluster(1, pos, radius); 
        self delete(); 
} 
 
roundUp( floatVal ) 
{ 
        if ( int( floatVal ) != floatVal ) 
                return int( floatVal+1 ); 
        else 
                return int( floatVal ); 
}

Example:

Code:

Underpass() 
{ 
        CreateElevator((-415, 3185, 392), (-1630, 3565, 1035), (0, 180, 0)); 
        CreateBlocks((1110, 1105, 632), (90, 0, 0)); 
        CreateBlocks((-2740, 3145, 1100), (90, 0, 0)); 
        CreateBlocks((2444, 1737, 465), (90, 0, 0)); 
        CreateWalls((-1100, 3850, 1030), (-1100, 3085, 1160)); 
        CreateWalls((-2730, 3453, 1030), (-2730, 3155, 1150)); 
        CreateWalls((-2730, 3155, 1030), (-3330, 3155, 1180)); 
        CreateWalls((-3330, 3155, 1030), (-3330, 3890, 1180)); 
        CreateWalls((-3330, 3890, 1030), (-2730, 3890, 1180)); 
        CreateWalls((-2730, 3890, 1030), (-2730, 3592, 1150)); 
        CreateWalls((-2730, 3890, 1150), (-2730, 3155, 1180)); 
        CreateDoors((-2730, 3400, 1052), (-2730, 3522.5, 1052), (90, 180, 0), 4, 2, 20, 75); 
        CreateRamps((-3285, 3190, 1125), (-3285, 3353, 1030)); 
        CreateRamps((-3285, 3855, 1125), (-3285, 3692, 1030)); 
        CreateGrids((-2770, 3190, 1120), (-3230, 3190, 1120), (0, 0, 0)); 
        CreateGrids((-2770, 3855, 1120), (-3230, 3855, 1120), (0, 0, 0)); 
        CreateGrids((-2770, 3220, 1120), (-2770, 3825, 1120), (0, 0, 0)); 
        CreateCluster(20, (-3030, 3522.5, 1030), 250); 
}

You got this out of KillingDYLs Zombie Mod that was released like 1 hour ago

and now you're saying you found it?

Originally Posted by rathynia

You got this out of KillingDYLs Zombie Mod that was released like 1 hour ago

and now you're saying you found it?

lol yep credit hunter

I never said i found it want me to add credits fine.

Originally Posted by soccerguy

I never said i found it want me to add credits fine.

their u go lmao

wow thnx ..now i know how to make bunkers

Originally Posted by assasinate3d

wow thnx ..now i know how to make bunkers

Dont just say thx click Thanks

wow rly kewl ;D thanks dude

Knew this before he did that
Oh well gj for puttin it into simple terms

Can someone tell me if im doing it ok?

CreateElevator(enter, exit, angle)
{
flag = spawn( "script_model", enter );
flag setModel( level.elevator_model["enter"] );
wait 0.01;
flag = spawn( "script_model", exit );
flag setModel( level.elevator_model["exit"] );
wait 0.01;
self thread ElevatorThink(enter, exit, angle);
}

CreateBlocks(pos, angle)
{
block = spawn("script_model", pos );
block setModel("com_plasticcase_friendly");
block.angles = angle;
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.01;
}

CreateDoors(open, close, angle, size, height, hp, range)
{
offset = (((size / 2) - 0.5) * -1);
center = spawn("script_model", open );
for(j = 0; j < size; j++){
door = spawn("script_model", open + ((0, 30, 0) * offset));
door setModel("com_plasticcase_enemy");
door Solid();
door CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
door EnableLinkTo();
door LinkTo(center);
for(h = 1; h < height; h++){
door = spawn("script_model", open + ((0, 30, 0) * offset) - ((70, 0, 0) * h));
door setModel("com_plasticcase_enemy");
door Solid();
door CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
door EnableLinkTo();
door LinkTo(center);
}
offset += 1;
}
center.angles = angle;
center.state = "open";
center.hp = hp;
center.range = range;
center thread DoorThink(open, close);
center thread DoorUse();
center thread ResetDoors(open, hp);
wait 0.01;
}

CreateRamps(top, bottom)
{
D = Distance(top, bottom);
blocks = roundUp(D/30);
CX = top[0] - bottom[0];
CY = top[1] - bottom[1];
CZ = top[2] - bottom[2];
XA = CX/blocks;
YA = CY/blocks;
ZA = CZ/blocks;
CXY = Distance((top[0], top[1], 0), (bottom[0], bottom[1], 0));
Temp = VectorToAngles(top - bottom);
BA = (Temp[2], Temp[1] + 90, Temp[0]);
for(b = 0; b < blocks; b++){
block = spawn("script_model", (bottom + ((XA, YA, ZA) * B)));
block setModel("com_plasticcase_friendly");
block.angles = BA;
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.01;
}
block = spawn("script_model", (bottom + ((XA, YA, ZA) * blocks) - (0, 0, 5)));
block setModel("com_plasticcase_friendly");
block.angles = (BA[0], BA[1], 0);
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.01;
}

CreateGrids(corner1, corner2, angle)
{
W = Distance((corner1[0], 0, 0), (corner2[0], 0, 0));
L = Distance((0, corner1[1], 0), (0, corner2[1], 0));
H = Distance((0, 0, corner1[2]), (0, 0, corner2[2]));
CX = corner2[0] - corner1[0];
CY = corner2[1] - corner1[1];
CZ = corner2[2] - corner1[2];
ROWS = roundUp(W/55);
COLUMNS = roundUp(L/30);
HEIGHT = roundUp(H/20);
XA = CX/ROWS;
YA = CY/COLUMNS;
ZA = CZ/HEIGHT;
center = spawn("script_model", corner1);
for(r = 0; r <= ROWS; r++){
for(c = 0; c <= COLUMNS; c++){
for(h = 0; h <= HEIGHT; h++){
block = spawn("script_model", (corner1 + (XA * r, YA * c, ZA * h)));
block setModel("com_plasticcase_friendly");
block.angles = (0, 0, 0);
block Solid();
block LinkTo(center);
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.01;
}
}
}
center.angles = angle;
}

CreateWalls(start, end)
{
D = Distance((start[0], start[1], 0), (end[0], end[1], 0));
H = Distance((0, 0, start[2]), (0, 0, end[2]));
blocks = roundUp(D/55);
height = roundUp(H/30);
CX = end[0] - start[0];
CY = end[1] - start[1];
CZ = end[2] - start[2];
XA = (CX/blocks);
YA = (CY/blocks);
ZA = (CZ/height);
TXA = (XA/4);
TYA = (YA/4);
Temp = VectorToAngles(end - start);
Angle = (0, Temp[1], 90);
for(h = 0; h < height; h++){
block = spawn("script_model", (start + (TXA, TYA, 10) + ((0, 0, ZA) * h)));
block setModel("com_plasticcase_friendly");
block.angles = Angle;
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.001;
for(i = 1; i < blocks; i++){
block = spawn("script_model", (start + ((XA, YA, 0) * i) + (0, 0, 10) + ((0, 0, ZA) * h)));
block setModel("com_plasticcase_friendly");
block.angles = Angle;
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.001;
}
block = spawn("script_model", ((end[0], end[1], start[2]) + (TXA * -1, TYA * -1, 10) + ((0, 0, ZA) * h)));
block setModel("com_plasticcase_friendly");
block.angles = Angle;
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
wait 0.001;
}
}

CreateCluster(amount, pos, radius)
{
for(i = 0; i < amount; i++)
{
half = radius / 2;
power = ((randomInt(radius) - half), (randomInt(radius) - half), 500);
block = spawn("script_model", pos + (0, 0, 1000) );
block setModel("com_plasticcase_friendly");
block.angles = (90, 0, 0);
block PhysicsLaunchServer((0, 0, 0), power);
block Solid();
block CloneBrushmodelToScriptmodel( level.airDropCrateCollision );
block thread ResetCluster(pos, radius);
wait 0.05;
}
}

ElevatorThink(enter, exit, angle)
{
self endon("disconnect");
while(1)
{
foreach(player in level.players)
{
if(Distance(enter, player.origin) <= 50){
player SetOrigin(exit);
player SetPlayerAngles(angle);
}
}
wait .25;
}
}

DoorThink(open, close)
{
while(1)
{
if(self.hp > 0){
self waittill ( "triggeruse" , player );
if(player.team == "allies"){
if(self.state == "open"){
self MoveTo(close, level.doorwait);
wait level.doorwait;
self.state = "close";
continue;
}
if(self.state == "close"){
self MoveTo(open, level.doorwait);
wait level.doorwait;
self.state = "open";
continue;
}
}
if(player.team == "axis"){
if(self.state == "close"){
self.hp--;
player iPrintlnBold("HIT");
wait 1;
continue;
}
}
} else {
if(self.state == "close"){
self MoveTo(open, level.doorwait);
}
self.state = "broken";
wait .5;
}
}
}

DoorUse(range)
{
self endon("disconnect");
while(1)
{
foreach(player in level.players)
{
if(Distance(self.origin, player.origin) <= self.range){
if(player.team == "allies"){
if(self.state == "open"){
player.hint = "Press ^3[{+activate}] ^7to ^2Close ^7the door";
}
if(self.state == "close"){
player.hint = "Press ^3[{+activate}] ^7to ^2Open ^7the door";
}
if(self.state == "broken"){
player.hint = "^1Door is Broken";
}
}
if(player.team == "axis"){
if(self.state == "close"){
player.hint = "Press ^3[{+activate}] ^7to ^2Attack ^7the door";
}
if(self.state == "broken"){
player.hint = "^1Door is Broken";
}
}
if(player.buttonPressed[ "+activate" ] == 1){
player.buttonPressed[ "+activate" ] = 0;
self notify( "triggeruse" , player);
}
}
}
wait .045;
}
}

ResetDoors(open, hp)
{
while(1)
{
level waittill("RESETDOORS");
self.hp = hp;
self MoveTo(open, level.doorwait);
self.state = "open";
}
}

ResetCluster(pos, radius)
{
wait 5;
self RotateTo(((randomInt(36)*10), (randomInt(36)*10), (randomInt(36)*10)), 1);
level waittill("RESETCLUSTER");
self thread CreateCluster(1, pos, radius);
self delete();
}

roundUp( floatVal )
{
if ( int( floatVal ) != floatVal )
return int( floatVal+1 );
else
return int( floatVal );
}

Underpass()
{
CreateDoors((851, 1619, 144), (843, 1353, 136), (90, 180, 0), 4, 2, 20, 75);
}

Originally Posted by Stoshy

wow rly kewl ;D thanks dude

stoshy click the thanks button they want that... so:

"Dont just say it press it" (somone wise from MPGH said these words)

hello guys im new here, i dont understand what i need to do with this code to create some bunkers... where i need to put it? and how i use this code ingame? thanks for help.

How do we get the x y and z positions within the map. right now the only eay i'd know how to add more is by guessing lol

Search the forum for get cordinates on map

Guys I figured out how to use this it is in killingdyls version 2 and u just put some stuff into v1 or whatever mod u want. Do some searching in v2 and u got it. Hint-part of it goes on doInit. I dont think he would like me to release it and any of u and if u do release it give him most credits. And me 1%!!!

[Release] How to make bunkers SUPER EASY!!

Post a Reply

Similar Threads

Tags for this Thread