GTA V solo public session (PC)

Firstly WARNING!!! This can and Will crash your PC if used incorrectly!
Use this at your own risk. I accept no responsibility for any loss of data/banning/damages from the use of this.

now that's out of the way with lets get on with creating your own public solo session in GTA Online. Follow these simple steps:
1) Install Python 2.7
2) downlod the solo.txt file and rename it solo.py
3) port foward UDP 6672 on your router
4) edit the second line of solo.py (in a text editor) and set '123.123.132.123' to your Public IP address (not 192.168)
5) launch GTA and join online (normally)
6) when in a session find a new session
7) while joining a new seesion run the solo.py (WARNING read all of this before doing this)
8) as you join the session and see your spawn locatin close the shell window
9) enjoy your solo session (if it worked correctly)

WARNING! the solo.py script uses a LOT of CPU power to keep active, leaving it running for more than a minuet or so can possibly crash your PC.
Keep an eye on your CPU useage in task manager and if it hits 100% for more than about 30 seconds close the solo.py window, wait about 2-3 seconds and run it again and repete until you have joined the session.

How this works:
This is simply a DOS script i developed a while ago. you are basically flooding the same port GTA uses. (this is also why loading times suck)
The script creates a LOT of subprocesses and each of those sends a LOT of random packets at you.

Notes:
This requires you to use your public IP address. using your private IP wont work as it requires a physical route to go through to generate enough traffic.
You -> router -> You == Traffic
You -> You == Nothing
It also requires you forward port 6672 UDP back to your PC so the traffic knows where to go.

Enjoy and good luck!