[TUT]4.3 Fix[softmod]

Requires cIOS to be installed

Warning: This guide is under constant modification. The guide works, but it has its issues which I am trying to remove. Read it very well before starting and be sure to download the current download- It can change. Last update- 7/8/10

Warning: It is illegal to obtain/distribute backups of games you do not own. This guide, myself, and this site does not support or promote software piracy. Play fair.

Be sure to download the updated pack
Download it now, not yesterday

Requires a standard SD card, 1-2g scandisk is best. SDHC cards will not work.

READ EVERYTHING VERY VERY CAREFULLY
If you FAIL, try try try again


Trouble Shooting tips:
-You may need a gc-controller- this will make your life easier
-Do NOT connect the wii nun-chuck during this hack.
-sd:\mmmconfig.txt is set to AutoLoadIOS=57, I hope this works well for you
-You may need to edit mmmconfig and change to ios80, or if installed 222/223, 236, 250, etc to get MMM to load and support wiimotes.
-If you wiimotes do not sync on app load, wait a minute, sometimes there is a delay
-If any part of this guide crashes, unplug the wii for a minute or two, then try, try, try again.

If you have issues and need help,
First read this thread for a solution
Load loadmii, then launch Syscheck.dol, run the scan
Paste your cvs report from sd card here.
Give a detailed description of your issue.

Stupid questions will probably result in stupid answers.
Read the guide a few times, and the advise, suggestions, and experiences of others BEFORE asking for help!!!
Stupid question = when I put the sd-card in the wii, nothing happens. - NO Sh*t, it does not work like that.
___________________________________

Step 1- Load Loadmii

Option 1- Indiana PWNS (4.3u, 4.3e)
-Play Lego Indiana Jones original, complete the first level, make a save game.
-Use the wii nunchuck to complete the first level
-Go to settings, data management, save games, wii
-Delete Lego Indiana Jones save game
-Click SD, copy Indiana PWNS for your region
-Do Not Connect the wii Nunchuck, disconnect it
-Load Lego Indiana Jones, load save game slot 1
-
When the game loads, you will be in Barnett College. Walk to the Art Room (through the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch to option (two silhouettes, staggered, with an arrow pointing between them).
-LoadMii starts, load from SD- Press A

Option 2- Smash Stack (4.3u)
-Do Not Connect the wii Nunchuck, disconnect it
-Load SSBB ntsc, wtih sd-card removed, make a save file
-Go to the stage builder, delete all custom stages, exit stage builder
-Insert SD-CARD, Go to stage builder
-LoadMii starts, load from SD- Press A
*You need to delete all custom stages for this to work"
*You may need to try this many, many times for it to work*

Option 3- boot2 Bootmii cboot2 load (4.3u, 4.3e, 4.3j)
This requires boo2 bootmii to be installed. If you where less than 4.2, it is gone.
-Extract 4.3-fix pack to sd:\
-Extract 4.3-cboot2-Loadmii.zip to sd:\
-Boot the wii, Loadmii starts, load from SD- Press A
-If nothing happens, you don't have bootmii

Option 4- cIOSCORP/DARKCORP (4.3u, 4.3e, 4.3j, 4.3k)
-use the DISK SWAP method to load app. Just use an in region game that reboots to the game health/safety screen. Burn a copy of that game, good and proper. Then use wiiscrubber to replace the main.dol of that iso with the loadmii boot.dol from 4.3-FIX.zip, burn the modified iso good and proper. Boot your game, once the game loads push HOME, swap the game disks, restart the game. Loadmii should load, do step 2. This is currently the only option for 4.3j/k systems. See post #151 for more details

Option 5- preinstalled Forwaders (4.3u 4.3e 4.3j, 4.3k)
If you have a forwarder installed on the wii, say to usbloader, neogamma, media player, etc. You can use this forwarder to load any app you wish. Just replace the sd:\apps\your-forwarder-app\boot.dol with the loadmii boot.dol found in the 4.3-FIX.zip. Then the forwarder will load loadmii and you can load most apps. Also if you have usbloader gx installed or similar, this app can load apps for you as well.
_____________________________________

Step 2- Load [MMM] Multi-Mod-Manager
-Select "Multi_MOD_Manager.dol" - Press A
-[MMM] Multi-Mod-Manager loads
-Select "Load another IOS" -press A
-Select ios250, or 222/223 or perhaps or others
______________________________________

Step 3- Wad Installs
Never Uninstall IOS, you will brick your wii
Never Uninstall IOS, you will brick your wii
Select "WAD Manager" - Press A
Press (1) to "Install all Wads" - Press A
17 wads should install without issue
"Press any button to continue"
Be sure all the wads install, very important
If the wads fail to install, install 1 at a time
Be sure to load ios236 prior to wad install
Press B two times- main menu
Never Uninstall IOS, you will brick your wii
Never Uninstall IOS, you will brick your wii

____________________________________

*Optional- Downgrade to System Menu 4.1
(Highly Recommended)
This is not nessescry, but downgrading to 4.1 will restore bannerbomb 1/2 and region free for modchips, and fully supports all hackmii versions
DO NOT do this before installing all wads without error (you will brick)
From the main menu, Select Manage System Menu, Press A
Install System Menu 4.1
For offline install download wad from HERE, extract to sd:\
Press B- main menu
DO NOT do this before installing all wads without error (you will brick)

____________________________________


Step 4- Hackmii Installer 1.06
Select APP Manager- Press A
Load the Hackmii Installer
4-a-
*Install HBC, DVDX, Bootmii as boot2 and ios*
Select Hackmii Installer -press A
Read: You have not paid, you have not been scammed -Press 1
Install Homebrew Channel
Install DVDx
Install Bootmii as IOS
and (yes install both ios and boot2)
Install Bootmii as Boot2 (if you can)
Exit Hackmii Installer
Homebrew Channel loads (HBC)
4-b-
Press HOME, launch Bootmii
Make a nand backup
Bootmii does not support the wiimote
Press Power, Power, Power, Reset, Reset (or use gc-controller)
Power = Right, Eject = Left, Reset = Select
Backup your Bootmii files to your PC
sd:\bootmii
sd:\nand.bin
sd:\key.bin
*DO NOT LOSE THESE FILES*
Exit to HBC (if you reboot prior to step 5, HBC will be removed)

_______________________________________

Step 5 - Priiloader Install
From HBC, select Priiloader - Press A,
Select Load - Press A
Priiloader Installer Loads
Read: Press A to install
Priiloader may give two errors
/loader.ini couldn't delete error -106
/password.txt couldn't delete error -106



These are expected and are not an issue
Wait, wait, wait, HBC loads
HOLD reset- Priiloader loads (if you reboot without enabling hacks, HBC will be removed)
Select "System Menu Hacks" - Press A
4.3 Enable: Block Disk Update, Block Online Update, No-Delete HAXX,JODI,DVDX,DISC,DISK,RZDx
4.1 Enable: Block Disk Update, Block Online Update,

Warning: If you reboot the wii without these hacks, your HBC will be deleted

Optional Priiloader Settings-
Hold reset and boot the wii, Priiloader loads
-Autoboot to HBC- Click settings, set auto-boot and return to HBC. Your wii now boots to HBC.
-Autoboot to USBloader-GX- click load/install, install usbloader-gx.dol, goto settings, set autoboot/return to installed file. Your boots into usbloader-gx. This is great for kids.
You can auto-boot to any app you like.

__________________________________________

[COLOR="rgb(105, 105, 105)"]Playing your backup games:[/COLOR]
You must load your game disk, or usb drives using neogamma or usbloader gx, or loader of your choice.
Do not try to load your backups from the disk channel, they won't work unless you install DARKCORP.
Note: 4.3 users- Don't use rebooters, they will load the system menu without priiloader hacks and you will lose HBC
cIOS- 249 is r17 to keep triiforce support. 250 is r19 base 57 for those who wish to use it. 222/223 is installed for those who need it, music games, MHT, etc, etc, etc.

_________________________________________

If something happens to your wii it is not my FAULT!you are responsable for your wii not me!

Please thank me!!support my work!

NOTE!!!!::IF YOU HAVE A VERSION OLDER THAN 4.3 DO NOT UPDAAAAATE!!! IT IS EASIER TO MOD LOWER VERSIONS!

Wanna upgrade your shop channel? just look at this thread!:Coming soon!

to long to boring to lazy

LOL you just have to read step 1 to 5!

Does this also work for a black wii?

No it doesnt work for virgin wii's(black) i will post another tutorial for them and 4.3 got released this summer i think....

EDIT: heres the link to mod black(virgin) wii's http://www.mpgh.net/forum/237-wii-ga...s-softmod.html

Ty This has helped me alot with solving my problems

This sucks. I need a game to do it.

hello, the darkcorp method needs it to be installed in the target wii? or can I for example use wii sport into an updated wii then a modified copy to run the loadmi, and theeeen install darkcopr=

hey when I get to this step-Select "Multi_MOD_Manager.dol" - Press A
-[MMM] Multi-Mod-Manager loads" It just goes to a blank screen and does nothing?

What do I do?

Edit: I got past that part finally after many attempts.

But now I am stuck at the step to load another ios the 250,222,223,249, and 254 will not load for me what do i need to do.

plz help me.

p.s. when i try to install the wads on any other ios it does not install any of them.

Thanks brah! Works great. Happy to have 4.1 back. Downside, I have 2 homebrew channels now

I have homebrew with nothing on it what do i do to get hacks ??????